5. Hydrograph Analysis

 Here is a comprehensive set of student notes formatted for a blog post. I have organized the information for better readability, added a section to define the key terms clearly, and fully completed the task table with the extreme cases for each factor.

Understanding River Discharge & The Storm Hydrograph

Have you ever wondered how a river responds after a massive downpour? Does it flood immediately, or does it take time for the water to reach the river channel? Geographers and hydrologists use a special model called a Storm Hydrograph to track this.

Before we look at the graph, we need to understand River Discharge.

Discharge is the amount of water passing a certain point in a river every second.

  • Calculation: Cross-sectional area (m²) × Velocity (m/s)

  • Units: CUMECS (Cubic Metres per Second).

Reading a Storm Hydrograph

A storm hydrograph displays how the discharge of a river changes over time in response to a specific rainfall event.

Key Features of the Hydrograph:

Uploading: 82522 of 82522 bytes uploaded.


  • Base Flow: The normal, day-to-day discharge of the river fed by ground water and soil moisture. Unless there is a severe drought, this flow is always present.

  • Storm Flow (Runoff): The extra water arriving in the river via surface runoff or rapid throughflow through the soil and rock.

  • Rising Limb: Shows how quickly the water reaches the channel. A steep rising limb means water is reaching the river fast—which is a major warning sign for potential flooding!

  • Falling Limb: Shows the river level receding after the bulk of the storm water has passed.

  • Peak Discharge: The absolute maximum amount of water in the river during the event. If this surpasses the bankfull discharge (the river's maximum capacity), a flood will occur.

  • Lag Time: The time difference between the peak of the rainfall and the peak discharge in the river.

Rule of Thumb: A short lag time and a steep rising limb create a "Flashy" hydrograph. This means the river rises very quickly, making a flood much more likely.

What Factors Affect the Shape of a Hydrograph?

Different environments react to rain differently. A concrete jungle will shed water immediately into drains, whereas a dense forest will absorb it.

Here is a breakdown of how different drainage basin factors create either a "Flashy" (dangerous) or "Subdued" (safer) hydrograph:





FactorFlashy Hydrograph(Steep rising limb, short lag time)Subdued Hydrograph(Gentle rising limb, long lag time)
Soil & Rock Type (Permeability)Impermeable: Clay soils or solid granite prevent water from soaking in, leading to rapid surface runoff.Permeable: Sandy soils or porous chalk allow rain to soak in (infiltration), slowing its journey to the river.
Vegetation CoverageSparse/Deforested: Little to no vegetation means rain hits the ground directly and runs off quickly.Dense Forest: Trees intercept the rain with their leaves and drink up water through their roots, massively delaying runoff.
Drainage Basin ShapeRound Basin: Water from all edges of the basin reaches the main channel at roughly the same time.Elongated (Long) Basin: Water from the far end takes much longer to reach the measurement point.
Relief (Slope) of the landSteep Slopes: Gravity forces water to run rapidly down hillsides into the river channel.Gentle/Flat Slopes: Water moves slowly, giving it more time to soak into the soil.
Level of UrbanisationHigh Urbanisation: Tarmac, concrete, and gutter systems act like slides, shooting water directly into rivers.Rural/Natural: Natural ground cover allows for natural infiltration and slower groundwater flow.
Land UseOvergrazed/Ploughed: Compacted soils from farm machinery or animals restrict water absorption.Undisturbed Pasture/Forestry: Natural soils maintain their structure, allowing deep water infiltration.
Stream DensityHigh Density: Many small tributary streams act as a highway system, rushing water into the main river quickly.Low Density: Few streams mean water has to travel further overland or through soil to reach the channel.

----------------------------------------------------------------------------------


Comments

Popular posts from this blog

1. Measurement of streamflow

2. Factors affecting streamflow